(モク・ツー  プラス  フォー)

NITTO & Moku2+4

Loveday handlebars

–Alex Moulton reproduction model–

(for Alex Moulton wishbone stem)

西京極本店 -Nishikyogoku Store (Engineering Workshop)-       

615-0883 京都市右京区西京極南大入町70番地

TEL: 075-326-3027

FAX: 075-326-3029

OPEN : 日曜日のみ(Open is only on Sunday)

三条店 -Sanjo Store (Sales Department & Factory)-

604-8083 京都市中京区三条通富小路上ル東側

(京都市中京区中之町24-2)

TEL: 075-746-6132

  1.   It was reprinted with Moku2 + 4 from the lineup as genuine Moulton from the latter half of 1980 to the beginning of 1990.

  2.   A more upright position than a straight handle is possible.

  3.   If you hold the flat part in the center of the steering wheel, you can take a forward leaning position, and if you fix the bent part of the steering wheel around the forearm, the position will be more stable and it will be easier to run. That is why the grip is also attached to the center of the handle.

  4.   Handle width : 390mm (C-C)

  5.   Made in Japan (NITTO)

Please contact us on our Instagram direct if you are intersted in it.https://instagram.com/moku2plus4/
お問い合わせは、お電話またはインスタグラムのダイレクトメッセージをご利用ください。https://instagram.com/moku2plus4/

¥12,500 (税込 ¥13,750)

  1.   1980年後半から1990年初頭にモールトン純正としてラインナップされていたのをMoku2+4で復刻しました。

  2.   ウィッシュボーンステム専用ハンドルです。

  3.   ストレートハンドルよりもアップライトなポジションが可能。

  4.   ハンドル中央のフラット部分を握れば前傾ポジションも取れ、ハンドルの曲がり部分を前腕辺りで固定すると、よりポジションが安定し走りやすくなります。ハンドル中央部にもグリップを取り付けているのはそのためです。

  5.   ハンドル幅:390mm(芯ー芯)

  6.   日本製 (日東)

THE SPACEFRAME MOULTONS  p238

Model : AM-GT Mk1

  1.   The Loveday handle is designed to be used in either orientation.   Since the end part spreads outward, the sense of stability when gripping the lower handle increases.

(Note : Not compatible with Shimano STI and Campagnolo ErgoPower)

  1.   Note : The Loveday handle is different from the standard drop handle, and the flat part of the handle end is designed to be longer than the general one so that the brake lever and grip for the flat handle can be attached. Therefore, even if the general drop handle is turned upside down, it cannot be used like the Loveday handle.

  2.   Handle width : 390mm (C-C)

  3.   Made in Japan (NITTO)

  1. Loveday ハンドルは、 どちらの向きでも使えるようにデザインしています。 エンド部が外側に広がっているため、下ハンドルを握ったときの安定感が増します。

(注意:シマノ STI や Campagnoloエルゴパワーとの相性は良くありません)

  1. 補足:Lovedayハンドルは 一般的なドロップハンドルと違い、 フラットハンドル用のブレーキレバーやグリップが取り付けられるように、ハンドルエンドの平らな部分を一般的なものより長く設計しています。そのため、一般的なドロップハンドルを逆向きにしてもLovedayハンドルのような使い方はできません。

  2.   ハンドル幅:390mm(芯ー芯)

  3.   日本製 (日東)

装着イメージ

Please contact us on our Instagram direct if you are intersted in it.https://instagram.com/moku2plus4/
お問い合わせは、お電話またはインスタグラムのダイレクトメッセージをご利用ください。https://instagram.com/moku2plus4/
HomeMokuTune.html
Moulton Parts & AccessoriesMoultonParts_Accessories.html